Fujitsu Eternus DX100 S3 User Manual page 857

Appendix A Error Messages/Error Codes
A.1 Error Messages
Message
number
EB500
EB501
EB502
EB503
EB504
EB505
EB506
EB507
EB508
EB509
EB50A
EB50B
EB50C
EB50D
EB50E
EB50F
EB510
EB900
EB901
Number of iSNS server has reached the iSCSI CA port limit.
The number of iSNS servers has reached the maximum number for the specified iSCSI CA port.
The specified port belongs to a port group.
The specified port belongs to a port group.
The lun group, which is set in specified host affinity and port, specify volume does not exist.
The specified volume does not exist in the LUN group where affinity is configured with the specified port
and/or host.
Host Response resource does not exist.
The specified Host Response does not exist.
Host I/F resource limited.
The management resource of the specified host interface has reached the usable upper limit.
Host affinity mode is inconsistent.
Host affinity mode is inconsistent.
The host specified does not exist.
The specified host does not exist.
The specified port and host is not affinity setting.
The specified port and host are not configured with affinity.
The specified port is affinity setting.
The target port has been configured with affinity.
The specified lun group are already used in the host affinity.
The LUN group is already using host affinity.
The specified lun group are already used in the TFO group.
The LUN group is already used in the TFO group.
The specified volume are already used in the host affinity.
The specified volume is already used in the host affinity.
The specified volume are already used in the TFO group.
The specified volume is already used in the TFO group.
The specified volume is already used in other TFO group.
The specified volume is already used in another TFO group.
Host I/F already registered.
The management resource of the specified host interface has already been registered.
Host Group resource does not exist.
The Host Group that is specified does not exist.
TFO pair does not exist in the volume of all of the lun group that has been set affinity in the specified host
and port specified.
A volume with a TFO pair does not exist in the LUN group where affinity is configured with the specified
port and/or host.
REC path is not set.
A REC path is not set.
REC path is not normal.
An error is detected in the REC path.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
Message
Countermeasure for the error
857
P2X0-1210-05ENZ0