Mitsubishi Electric MELSERVO MR-J2-A Product Specifications And Installation Manual page 150

4.INSTALLATION
(2) Installation direction and clearances
1) Installation of one servo amplifier
Control box
40mm
(1.6 in.)
or more
10mm
(0.4 in.)
or more
MR – J2
2) Installation of two or more servo amplifiers
Leave a large clearance between the top of the servo amplifier and the internal surface of
the control box, and install a fan to prevent the internal temperature of the control box from
exceeding the environmental conditions.
30mm
(1.2 in.)
or more
10mm
(0.4 in.)
or more
40mm
(1.6 in.)
or more
Control box
100mm
(4.0 in.)
or more
MR – J2
40mm
(1.6 in.)
or more
4– 3
Control box
Wiring clearance
70mm
(2.8 in.)
10mm
(0.4 in.)
or more
Top
Bottom
30mm
(1.2 in.)
or more
4