7B-35 Air Conditioning System: Manual Type
Relief Valve Inspection
By using special tool, check is there is refrigerant
leakage.
If there is refrigerant leakage, replace the relief valve.
Special tool
(A) : 09990–86012
Relief valve Removal and Installation
Removal
1) Recover refrigerant from the A/C system with
recovery and recycling equipment referring to
"Recovery" in "Operation Procedure for Refrigerant
Charge".
2) Remove right side engine under cover.
3) Remove relief valve (1) from compressor (2).
S6RW0C7216026
(A)
I5RS0C721014-01
S6RW0C7216027
2
1
I4RS0A720048-01
Installation
Reverse removal procedure noting the following
instructions.
• Use new O-ring
• Apply compressor oil to O-ring.
• Tighten relief valve to the specified torque.
Tightening torque
Relief valve (a): 8 N·m (0.8 kgf-m, 6.0 lb-ft)
• Evacuate and charge the A/C system referring to
"Evacuation" and "Charge" in "Operation Procedure
for Refrigerant Charge".
(a)
I4RS0A720049-01