Creating A Nodeb Commissioning Task - Huawei 3900 Series Commissioning Manual

5 Commissioning the MBTS in GL or UL Mode on the
M2000
Procedure
Step 1 Choose Configuration > Auto Deployment > GBTS Auto Deployment from the main menu
of the M2000 client to open the GBTS Auto Deployment window.
For details about the GBTS Auto Deployment window, see
GBTS
Step 2 Click
Exporting the Deployment List and Configuration Files of GBTSs.
l
l
Step 3 If the version of the imported GBTS software or patch is incorrect or the contact person
information is incorrect, double-click the corresponding information record on the GBTS List
tab page, and then type the correct information.
----End
Postrequisite
Start the GBTS commissioning task to enable the M2000 to automatically commission the
GBTS. For details, see Starting a GBTS Commissioning Task.

5.2.2 Creating a NodeB Commissioning Task

This section describes how to create a NodeB commissioning task. The M2000 creates a
commissioning task for each NodeB based on the planned data in the imported NodeB
deployment list. After obtaining the software package and configuration file, you can activate
the commissioning task so that it starts automatic commissioning.
Prerequisite
NodeB version files and configuration files are saved on the local PC. The configuration file of
each NodeB is saved in the folder named after the NodeB, and all the NodeB configuration files
are saved in the same upper-layer folder. In this way, you can select the upper-layer folder to
upload all the configuration files at a time.
5-6
Commissioning.
to import the GBTS deployment list. For details about the GBTS deployment list, see
TIP
If you do not export the GBTS deployment list through the CME, you can export the template of the GBTS
deployment list on the M2000 client and then enter the related data based on the planned data confirmed
with network planning engineers. To export the GBTS deployment list template, perform the following
operations:
1. Click . The Save dialog box is displayed.
2. Specify the save path, enter the filename, and then click Save.
The exported template of GBTS deployment list is in .csv format. By default, the filename is
GBTS_Auto_Deployment_List_Template.csv. You can change the filename as required.
If the import succeeds, a message is displayed on the Operation Information tab page,
informing you of the success. In addition, the M2000 creates a commissioning task for each
GBTS contained in the deployment list and displays the tasks on the GBTS List tab page.
If the import fails, the GBTSs that fail to be imported and the failure causes are displayed on
the Operation Information tab page. For details about failure symptoms and solutions, see
What Should I Do When a Failure Message Is Displayed During the Import of the GBTS
Deployment List?.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3900 Series Multi-Mode Base Station
Commissioning Guide
5.12.1 Interface Description:
Issue 02 (2010-07-30)