Huawei 3900 Series Commissioning Manual page 62

5 Commissioning the MBTS in GL or UL Mode on the
M2000
This chapter describes how to monitor a NodeB commissioning task. By monitoring the NodeB
commissioning task, you can learn the commissioning progress and status, and then rectify
commissioning faults (if any) in time.
5.7 Monitoring the eNodeB Commissioning Task
This section describes how to monitor an eNodeB commissioning task. By monitoring the
eNodeB commissioning task, you can learn the eNodeB commissioning progress and status, and
then perform operations on the eNodeB commissioning task.
5.8 Obtaining the Commissioning Report
The commissioning report records the operation details, results, and error information obtained
during the commissioning. The eNodeB commissioning report can be viewed during the
commissioning task for handling problems in time, or be obtained after the commissioning task
for report archiving.
5.9 Checking the Operating Status of the Base Station
The operating status of a base station can be viewed in the commissioning report.
5.10 Testing the Basic Services of the eNodeB
This section describes how to test the basic services of the eNodeB.
5.11 Confirming the Commissioning Task
After the M2000 finishes commissioning a base station automatically, the commissioning task
enters the to-be-confirmed state, waiting for manual confirmation that the commissioning is
complete.
5.12 Reference to the GBTS Commissioning Interface
This section describes the interfaces and parameters for GBTS commissioning and facilitates
you to perform relevant operations for GBTS commissioning.
5.13 Reference to the NodeB Commissioning Interface
This section describes the interfaces and parameters for NodeB commissioning and facilitates
you to perform relevant operations for NodeB commissioning.
5-2 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3900 Series Multi-Mode Base Station
Commissioning Guide
Issue 02 (2010-07-30)