Figure 7-30 Switching The Language - Huawei 3900 Series Commissioning Manual

3900 Series Multi-Mode Base Station
Commissioning Guide
Password
Office
Proxy Server
Step 2 In the Office area, set IP Address and Office.
Step 3 Type the user name and password in corresponding text boxes.
Step 4 Click Login to log in to the NodeB.
Step 5 If a dialog box is displayed, as shown in
of the NodeB does not match that of the LMT. In this case, switch the NodeB language so that
you can log in to the NodeB through the LMT.

Figure 7-30 Switching the language

The NodeB is reset after you switch the NodeB language.
Step 6 Click Yes to switch the NodeB language.
If you click No, a dialog box is displayed, indicating The language of NE differs from LMT. Click OK and
you can still log in to the NodeB. This operation, however, may cause the following effects:
l
l
----End
Issue 02 (2010-07-30)
CAUTION
NOTE
The language of the message reported by the NodeB does not match that of the LMT.
The message cannot be parsed during software management.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Commissioning the MBTS by Using Local Maintenance
Password of the NodeB. By default, the
password is NodeB. The password consists of
6 to 16 alphanumeric and case-sensitive
characters.
Select the name and IP address of the LMT
client that is connected to the NodeB. Click
to edit the office information. When you
log in to the NodeB locally through the LMT,
the IP address of the office is the same as the
IP address of the NodeB local maintenance
channel.
Leave this field blank. Ensure that you do not
select the check box.
Figure 7-30, you can infer that the language version
Terminal and M2000
7-35