Figure 7-31 Bsc6000 Local Maintenance Terminal Window - Huawei 3900 Series Commissioning Manual

7 Commissioning the MBTS by Using Local Maintenance
Terminal and M2000
l
l
l
l
l
Procedure
l

Figure 7-31 BSC6000 local maintenance terminal window

7-38
CAUTION
The refresh function of the Internet Explorer (IE) is unavailable on the LMT. When you use
the refresh function on the main interface of the LMT, the main interface exits. If you use
the refresh function on the monitoring page, a script error occurs.
When the LMT runs in the IE browser, do not change the properties of the file system.
Otherwise, the IE is automatically refreshed, and therefore the interface of the LMT becomes
abnormal.
If you start the FTP service through choosing Start > Run, the LMT window is replaced
with the login dialog box of the FTP server. To avoid this problem, perform the following
settings: Choose Tools > Internet Options from the menu of the IE. On the Advanced tab
page, clear Reuse windows for launching shortcuts under Browse.
If the colors of the LMT window cannot be displayed, perform the following settings: Choose
Tools > Internet Options from the menu of the IE. On the General tab page, click
Accessibility. Then, clear Ignore colors specified on Web pages under Formatting.
In the case of an LMT version upgrade or rollback, you need to clear the buffer and cookies
of the IE.
Logging in to the eNodeB through LMT.
1. In the IE address bar, enter the IP address for local maintenance of the eNodeB main
control board. By default, the IP address is 192.168.0.49.
2. Click Go. The Local Maintenance Terminal dialog box is displayed, as shown in
Figure 7-31.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3900 Series Multi-Mode Base Station
Commissioning Guide
Issue 02 (2010-07-30)