Huawei 3900 Series Commissioning Manual page 149

3900 Series Multi-Mode Base Station
Commissioning Guide
Procedure
l
l
Issue 02 (2010-07-30)
NOTE
The priority of a mode does not need to be considered during the MBTS commissioning.
l
Before upgrading the dual-mode MRFU or RRU3908 to a target version on the local maintenance
l
terminal, check in which mode (GSM, UMTS, or LTE) the MRFU or RRU3908 is upgraded and obtain
the upgrade control rights on the local maintenance terminal in the mode.
Local end of the MBTS
1. Start the GBTS SMT to commission the GBTS on the base station side. For details,
see 7.2 Running the GBTS
2. Configure the basic data of the GBTS on the SMT. For details, see
the Basic Data of the
3. Optional: Check the transmission between the BBU and the BSC. For details, see
7.4 Checking the Transmission Between the BBU and the BSC on the BTS
Side.
4. Start the NodeB LMT. For details, see
5. Upgrade the NodeB software and data configuration file using the NodeB LMT. For
details, see 7.6 Upgrading the NodeB Software and Downloading the Data
Configuration File.
6. Start the eNodeB LMT. For details, see
7. Upgrade the eNodeB software and data configuration file using the eNodeB LMT.
For details, see 7.8 Upgrading the eNodeB Software and Downloading the Data
Configuration File.
8. Download the eNodeB commissioning license file using the eNodeB LMT. For
details, see 7.9 Downloading the eNodeB
9. Check the connection status of the base station, and rectify faults if any. For details,
see 6.4 Checking the Status of the LEDs and Rectifying the
Remote end of the MBTS
NOTE
When the MBTS is commissioned remotely on the M2000, commission the base station of a mode,
and then commission the base station of the other mode. The two modes are equal in priority.
1. Wait till the transmission is available.
2. Create a commissioning task on the M2000. For details, see
Commissioning
3. Optional: If a GBTS is to be commissioned and Intervening transmission is selected
when a commissioning task is created, manually check the GBTS transmission state
and rectify faults (if any). For details, see
Transmission.
4. The M2000 automatically commissions the MBTS. For details, see
Commissioning the MBTS on the
commissioning, monitor the commissioning progress and alarms, and rectify faults (if
any). The monitoring operations vary according to modes. For details on the operations
in each mode, see
the NodeB Commissioning
Task.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Commissioning the MBTS by Using Local Maintenance
SMT.
GBTS.
7.5 Running the NodeB
7.7 Running the eNodeB LMT
Task.
M2000. During the process of the MBTS
5.5 Monitoring the GBTS Commissioning
Task, and 5.7 Monitoring the eNodeB Commissioning
Terminal and M2000
LMT.
License.
Faults.
5.2 Creating a
5.3 Intervening the GBTS
Task,
7.3 Configuring
.
5.4
5.6 Monitoring
7-5