Running The Gbts Smt; Setting The Ip Address Of The Smt Client - Huawei 3900 Series Commissioning Manual

7 Commissioning the MBTS by Using Local Maintenance
Terminal and M2000
----End

7.2 Running the GBTS SMT

To run the GBTS site maintenance terminal (SMT), you need to first set the IP address of the
SMT client, connect the base station and the SMT, and then log in to the SMT.

7.2.1 Setting the IP address of the SMT Client

This section describes how to set the IP address of the SMT client. The IP address of the SMT
client is on the same network segment as the IP address (192.168.0.72/255.255.255.0) of the
GTMU.
7.2.2 Connecting the SMT Client and the Base Station
This section describes how to connect the SMT client to the ETH port on the GTMU of the base
station through an Ethernet cable. After the connection is established, you can operate and
maintain the base station on the SMT.
7.2.3 Logging In to the SMT
This section describes how to log in to the base station through the SMT.
7.2.1 Setting the IP address of the SMT Client
This section describes how to set the IP address of the SMT client. The IP address of the SMT
client is on the same network segment as the IP address (192.168.0.72/255.255.255.0) of the
GTMU.
Prerequisite
The TCP/IP protocol is applied on the SMT client.
Procedure
Step 1 To set the IP address of the SMT client, perform the following steps. This section takes the
Windows XP operating system as an example. Choose Start > Setting > Control Panel.
Step 2 Double-click Network Connections in the displayed Control Panel window. Right-click Local
Area Connection in the displayed dialog box.
Step 3 Choose Properties from the shortcut menu. The Local Area Connection Properties dialog
box is displayed.
Step 4 Select Internet Protocol (TCP/IP), and click Properties. The Internet Protocol (TCP/IP)
Properties dialog box is displayed.
7-6
5. Obtain the commissioning report from the M2000. For details, see
Commissioning Report.
6. View the commissioning report to check the MBTS operating status. For details, see
5.9 Checking the Operating Status of the Base
7. Verify eNodeB services. For details, see
eNodeB.
8. Confirm the MBTS commissioning task. For details, see
Commissioning Task.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3900 Series Multi-Mode Base Station
Commissioning Guide
Station.
5.10 Testing the Basic Services of the
5.11 Confirming the
Issue 02 (2010-07-30)
5.8 Obtaining the