Huawei 3900 Series Commissioning Manual page 81

3900 Series Multi-Mode Base Station
Commissioning Guide
No
.
4
Issue 02 (2010-07-30)
Procedu Description
re
Automati The automatic software
cally commissioning consists of the
commissi following sub-procedures:
on the
GBTS cell initialization
l
software
detection: Checks the
initialization status of each cell
under the GBTS.
If all cells under the GBTS are
initialized, the GBTS cell
initialization detection succeeds.
If any cell fails to be initialized
after the GBTS cell initialization
detection is performed three
times, the commissioning
automatically stops and switches
to the Abnormal status.
GBTS information query: The
l
query results are saved in the
commissioning report.
Regardless of whether the query
succeeds, the M2000
automatically proceeds with the
next sub-procedure after the
query.
Standing wave ratio test: The
l
standing wave ratio test is used
to check whether the antenna
system of the GBTS is faulty.
This test is performed according
to the settings that you configure
during the startup of the
commissioning task. The test
results are saved in the
commissioning report.
Regardless of whether the test
succeeds, the M2000
automatically proceeds with the
next sub-procedure after the test.
GBTS alarm monitoring:
l
Monitors all alarms of a certain
GBTS and all relevant alarms of
the GBSC managing the GBTS
and provides the fault diagnosis
function.
Cell serviceability detection:
l
Checks the serviceability status
of each cell under the GBTS.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Commissioning the MBTS in GL or UL Mode on the
Standards for Continuing the
Commissioning
You can set the M2000 to skip the
standing wave ratio test when
starting the commissioning task.
Note that the GBTS cell
initialization detection and cell
serviceability detection must be
performed successfully.
M2000
5-21