Creating An Enodeb Commissioning Task - Huawei 3900 Series Commissioning Manual

5 Commissioning the MBTS in GL or UL Mode on the
M2000
3.
----End
Save Paths of Version Files and Configuration Files on the M2000 Server
After version files and configuration files are uploaded to the M2000 server, they are stored in
the following paths:
l
l
l

5.2.3 Creating an eNodeB Commissioning Task

After the preparations for eNodeB commissioning are complete, create the eNodeB
commissioning task on the M2000. This task will be automatically performed by the M2000.
The M2000 supports automatic commissioning of multiple eNodeBs.
Prerequisite
l
l
5-8
Path, and then specify a local save path of the version files to facilitate the upload of
the version files.
In the NE navigation tree in the Upload Configuration Files area, select the NEs whose
l
configuration files need to be uploaded. After selecting the NodeB, you can click the
button next to Local Path to specify the upper-layer folder for the folder of each NE
configuration file to facilitate the upload of configuration files.
TIP
To upload version files, you need to select the upper-layer folder of version files such as the .csp
l
files after you decompress the software package in a local path.
To upload configuration files, you need to save the configuration file of each NodeB in the folder
l
whose name is the NodeB name and then save the folders of all the NodeB configuration files in
one upper-layer folder. When uploading configuration files, you need to select the upper-layer
folder to which the NodeB name folders belong.
After the upload starts, the information about the source path, destination path, upload
progress, and upload result is displayed at the bottom of the Upload version and config
files window.
After the upload is complete, click Close.
Basic version: /export/home/sysm/ftproot/unKnownNodeB/Software/version
number/, where version number refers to the uploaded basic version number, such as
V200R012C00.
Patch version: /export/home/sysm/ftproot/unKnownNodeB/Patch/version number/,
where version number refers to the version of the uploaded patch, such as
V200R012C00SPC001.
Configuration file: /export/home/sysm/ftproot/unKnownNodeB/Configuration/NodeB
name/, where NodeB name refers to the name of the NodeB of the configuration file, for
example, NodeB-Shanghai.
The M2000 server and client are connected and are running properly. You have logged in
to the M2000 client.
If the eNodeB and M2000 server are not in the same network segment, the router or switch
between the eNodeB and M2000 server must be configured as DHCP Relay.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3900 Series Multi-Mode Base Station
Commissioning Guide
Issue 02 (2010-07-30)