Table 4-2 Preparing For Mbts Commissioning At Gbts; Table 4-3 Preparing For Mbts Commissioning At Nodeb - Huawei 3900 Series Commissioning Manual

3900 Series Multi-Mode Base Station
Commissioning Guide
Step
4
5
6
7
Prepare for MBTS commissioning at GBTS by referring to

Table 4-2 Preparing for MBTS commissioning at GBTS

Step
1
2
3
Prepare for MBTS commissioning at NodeB by referring to

Table 4-3 Preparing for MBTS commissioning at NodeB

Step
1
2
Issue 02 (2010-07-30)
Operation
Prepare the data configuration file of the MBTS to be commissioned. This file can
be created and exported using CME, and provided by configuration engineers.
Prepare the target version software package of the MBTS to be commissioned.
You can download the package from the website http://support.huawei.com/.
Prepare the deployment list. For details on the parameters in the deployment list,
see 4.9.2 Parameters for the MBTS Deployment
Check that the network is normal.
NOTE
Before both a GBTS and a NodeB are newly deployed or before a GBTS is newly deployed while a NodeB
is running normally, prepare for MBTS commissioning at GBTS by referring to
Operation
Run the ACT BTS command to activate the GBTS.
Upload the GBTS configuration data to the controller and validate it on the
controller side.
Upload the GBTS target version software package to the controller.
NOTE
Before both a GBTS and a NodeB are newly deployed or before a NodeB is newly deployed while a GBTS
is running normally, prepare for NodeB commissioning by referring to
Operation
Check that the M2000 is installed with an adaptation layer whose version matches
the version of the NodeB to be commissioned.
Check that the NodeB relay server is set correctly.
The NodeB relay server is usually set to the controller that controls the NodeB.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Commissioning the MBTS in GU Mode on the M2000
Table
Table
List.
4-2.
Table 4-2.
4-3.
Table 4-3.
4-5