3900 Series Multi-Mode Base Station
Commissioning Guide
Add PMU and FMU, as shown in
Figure 7-11 Board Configuration window
Step 8 Set the related parameters. On the SMT, the parameters of EMU cannot be set and the parameters
of PMU are default values. Therefore, no parameter setting is required.
Step 9 Configure the APMU. The PMU is added for the BTS3900A and DBS3900. Perform the
following steps to configure the new types of PMU, such as APM100 and APM30.
1.
2.
3.
4.
Issue 02 (2010-07-30)
Click Board in the navigation tree.
The Board Configuration and Board Management windows are displayed.
Double-click Board Management. The Board Management window is displayed.
In the Board Management window, right-click PMU, and then choose Parameter
Management from the shortcut menu.
The Parameter Management dialog box is displayed.
On the Parameter Management dialog box, click Parameter Set. Select APM30 or other
options under APMU Type according to the configuration data, as shown in
7-12.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Commissioning the MBTS by Using Local Maintenance
Figure
7-11.
Terminal and M2000
Figure
7-15