Figure 8-2 Nodeb Alarm Information - Huawei 3900 Series Solution Manual

8 Operation and Maintenance
l
l
l
l
l
The procedure for handling the inconsistent parameter configuration alarm is as follows:
1.
8-4
When the parameters of the EMU configured on the GBTS side and the NodeB side are
inconsistent, the GBTS reports a 6166 Parameter set collision alarm.
When the parameters of the power system configured on the GBTS side and the NodeB
side are inconsistent, the GBTS reports a 6062 Parameter set collision alarm.
When the parameters of the monitoring board for the heater configured on the GBTS side
and the NodeB side are inconsistent, the GBTS reports a 10784 Parameter set collision
alarm.
When the parameters of the fans configured on the GBTS side and the NodeB side are
inconsistent, the GBTS reports a 9770 Parameter set collision alarm.
When the common data configurations on the GBTS side and the NodeB side are
inconsistent, the NodeB reports a 3001 RS485 Equipment Config Collision Alarm.
When the inconsistent parameter configuration alarm is reported, view the alarm
information and record Board type, Command Word, and SubLink No..
shows the NodeB alarm information and

Figure 8-2 NodeB alarm information

Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3900 Series Base Station GU Co-Cabinet
Figure 8-3 shows the GBTS alarm information.
Solution Guide
Figure 8-2
Issue 04 (2009-07-30)