Creating An Mbts Commissioning Task; Creating An Mbts Commissioning Task (Deploying Both The Gbts And The Nodeb) - Huawei 3900 Series Commissioning Manual

4 Commissioning the MBTS in GU Mode on the M2000

4.3 Creating an MBTS Commissioning Task

This chapter describes how to create an MBTS commissioning task. After completing MBTS
commissioning preparations, you can create an MBTS commissioning task on the M2000 and
enable the M2000 to commission the MBTS automatically.

4.3.1 Creating an MBTS Commissioning Task (Deploying Both the GBTS and the NodeB)

This section describes how to create an MBTS commissioning task when you need to deploy
both the GBTS and the NodeB. After making MBTS commissioning preparations, you can create
an MBTS commissioning task on the M2000 and enable the M2000 to commission the MBTS
automatically.
4.3.2 Creating an MBTS Commissioning Task (Deploying a NodeB When the GBTS Is Normal)
This section describes how to create an MBTS commissioning task when the GBTS is normal
and you need to deploy a NodeB. After making MBTS commissioning preparations, you can
create an MBTS commissioning task on the M2000 and enable the M2000 to commission the
MBTS automatically.
4.3.3 Creating an MBTS Commissioning Task (Deploying a GBTS When the NodeB Is Normal)
This section describes how to create an MBTS commissioning task when the NodeB is normal
and you need to deploy a GBTS. After making MBTS commissioning preparations, you can
create an MBTS commissioning task on the M2000 and enable the M2000 to commission the
MBTS automatically.
4.3.1 Creating an MBTS Commissioning Task (Deploying Both the
GBTS and the NodeB)
This section describes how to create an MBTS commissioning task when you need to deploy
both the GBTS and the NodeB. After making MBTS commissioning preparations, you can create
an MBTS commissioning task on the M2000 and enable the M2000 to commission the MBTS
automatically.
Prerequisite
l
l
l
Context
The M2000 can commission a maximum of 500 base stations at a time, where one MBTS is
equal to two base stations (the NodeB and the GBTS are not differentiated).
Procedure
Step 1 Choose Configuration > Auto Deployment > MBTS Auto Deployment. The MBTS Auto
Deployment window is displayed.
Step 2 Keep ready the NodeB deployment list.
4-6
The M2000 client is started.
MBTS commissioning preparations are complete.
The controller to which the MBTS to be commissioned belongs is properly connected to
the M2000.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3900 Series Multi-Mode Base Station
Commissioning Guide
Issue 02 (2010-07-30)