Huawei 3900 Series Commissioning Manual page 117

3900 Series Multi-Mode Base Station
Commissioning Guide
Parameter
OM VLAN ID
OM VLAN Priority
DHCP VLAN ID
PING VLAN ID
OM PING IP address
OM PING IP Subnet
mask
NodeB Type
NodeB BaseLine
Software Version
NodeB Cold Patch
Version
NodeB Hot Patch
Version
NodeB Configuration
File CRC
Issue 02 (2010-07-30)
Description
VLAN ID of the NodeB configured at the RNC (it must be exported
from the CME if the VLAN is planned)
This parameter can be optionally exported from the CME. It is not
configurable in the NodeB Auto Deployment window.
VLAN priority of the NodeB configured at the RNC (it must be
exported from the CME if the VLAN is planned)
This parameter can be optionally exported from the CME. It is not
configurable in the NodeB Auto Deployment window.
Same value as OM VLAN ID (it must be exported from the CME if
the VLAN is planned)
This parameter can be optionally exported from the CME. It is not
configurable in the NodeB Auto Deployment window.
Same value as OM VLAN ID (it must be exported from the CME if
the VLAN is planned)
This parameter can be optionally exported from the CME. It is not
configurable in the NodeB Auto Deployment window.
OM ping IP address
This parameter must be exported from the CME. It is not configurable
in the NodeB Auto Deployment window.
OM ping subnet mask
This parameter must be exported from the CME. It is not configurable
in the NodeB Auto Deployment window.
Type of the NodeB to be commissioned
This parameter must be exported from the CME. It is not configurable
in the NodeB Auto Deployment window.
Baseline version of the target NodeB (it must be exported from the
CME if the target version is planned)
This parameter can be optionally exported from the CME. It is
configurable in the NodeB Auto Deployment window.
Version of the cold patch of the target NodeB (it must be exported
from the CME if the target version is planned)
This parameter can be optionally exported from the CME. It is
configurable in the NodeB Auto Deployment window.
Version of the hot patch of the target NodeB (it must be exported
from the CME if the target version is planned)
This parameter can be optionally exported from the CME. It is
configurable in the NodeB Auto Deployment window.
CRC value of the NodeB data configuration file
This parameter can be optionally exported from the CME. It is not
configurable in the NodeB Auto Deployment window.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Commissioning the MBTS in GL or UL Mode on the
M2000
5-57