Creating A Commissioning Task; Creating A Gbts Commissioning Task - Huawei 3900 Series Commissioning Manual

3900 Series Multi-Mode Base Station
Commissioning Guide
according to modes. For details on the operations in each mode, see
Commissioning
the eNodeB Commissioning
Step 4 Obtain the commissioning report from the M2000. For details, see
Commissioning
Step 5 View the commissioning report to check the MBTS operating status. For details, see
Checking the Operating Status of the Base
Step 6 Verify eNodeB services. For details, see
Step 7 Confirm the MBTS commissioning task. For details, see
Task.
----End

5.2 Creating a Commissioning Task

This chapter describes how to create a base station commissioning task on the M2000. The
operations of creating a base station commissioning task vary according to the mode of the base
station. Therefore, the commissioning task must be created based on the mode of the base station
to be commissioned. After the commissioning task is created, it can be activated immediately.
Then, the M2000 starts to commission the base station automatically.

5.2.1 Creating a GBTS Commissioning Task

This section describes how to create a GBTS commissioning task. After you create a GBTS
commissioning task, the M2000 automatically commissions the GBTS. You can enable the
M2000 to automatically commission GBTSs in batches.
5.2.2 Creating a NodeB Commissioning Task
This section describes how to create a NodeB commissioning task. The M2000 creates a
commissioning task for each NodeB based on the planned data in the imported NodeB
deployment list. After obtaining the software package and configuration file, you can activate
the commissioning task so that it starts automatic commissioning.
5.2.3 Creating an eNodeB Commissioning Task
After the preparations for eNodeB commissioning are complete, create the eNodeB
commissioning task on the M2000. This task will be automatically performed by the M2000.
The M2000 supports automatic commissioning of multiple eNodeBs.
5.2.1 Creating a GBTS Commissioning Task
This section describes how to create a GBTS commissioning task. After you create a GBTS
commissioning task, the M2000 automatically commissions the GBTS. You can enable the
M2000 to automatically commission GBTSs in batches.
Prerequisite
l
l
Issue 02 (2010-07-30)
Task, 5.6 Monitoring the NodeB Commissioning
Report.
The preparations for GBTS commissioning are made. For details. see Preparing for GBTS
Commissioning.
The connection between the GBSC managing the GBTS to be commissioned and the
M2000 is normal.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Commissioning the MBTS in GL or UL Mode on the
Task.
Station.
5.10 Testing the Basic Services of the
5.5 Monitoring the GBTS
Task, and 5.7 Monitoring
5.8 Obtaining the
5.11 Confirming the Commissioning
M2000
5.9
eNodeB.
5-5