Configuring Bts Logical Objects; Figure 7-12 Parameter Management Dialog Box - Huawei 3900 Series Commissioning Manual

7 Commissioning the MBTS by Using Local Maintenance
Terminal and M2000
Step 10 Click Close to complete the configuration of BTS boards.
----End

7.3.3 Configuring BTS Logical Objects

This section describes how to configure logical objects of the BTS. The BTS logical object
configuration consists of the cell configuration, carrier binding, and activation of cell
configuration data.
Context
Procedure
Step 1 Add a cell. Click Site0, and double-click Site Configuration in the Function area.
The Site Configuration dialog box is displayed, as shown in
7-16

Figure 7-12 Parameter Management dialog box

NOTE
The following part describes the configuration and binding of carriers based on one MRRU configured
with two carriers.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3900 Series Multi-Mode Base Station
Commissioning Guide
Figure 7-13.
Issue 02 (2010-07-30)