7 Commissioning the MBTS by Using Local Maintenance
Terminal and M2000
----End
7.2.3 Logging In to the SMT
This section describes how to log in to the base station through the SMT.
Prerequisite
l
l
Procedure
Step 1 Start the SMT.
l
l
Figure 7-2 SMT login interface
7-8
The IP address is incorrect.
–
The SMT client is properly connected to the base station.
The latest software of the SMT is installed on the SMT client.
If the connection between the SMT client and the base station is established, a dialog box
shown in
Figure 7-2
If the SMT client cannot communicate with the base station, the Communication failed
dialog box is displayed, as shown in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
is displayed. The SMT is successfully started.
Figure
3900 Series Multi-Mode Base Station
7-3. Go to
Step
2.
Commissioning Guide
Issue 02 (2010-07-30)