Figure 5-9 Enodeb Auto Deployment Tab Page - Huawei 3900 Series Commissioning Manual

3900 Series Multi-Mode Base Station
Commissioning Guide
eNodeB
Commiss
ioning
Process
Automatic
configurati
on
Testing
and
verificatio
n
eNodeB
deploymen
t complete
Procedure
Step 1 On the M2000 client, choose Configuration > Auto Deployment > eNodeB Auto
Deployment. The eNodeB Auto Deployment tab page is displayed, as shown in

Figure 5-9 eNodeB Auto Deployment tab page

Step 2 View Current Step and Current Step Progress of the commissioning task. Click the Step
Execution tab page, and view Status, Progress, and Details of the steps of each phase.
----End
Issue 02 (2010-07-30)
Description
Automatic configuration includes the steps listed as follows. If you deselect a
step when importing the EDS file, or if the file related to a step does not exist,
the automatic eNodeB commissioning skips this step and proceeds.
Downloading the eNodeB software
l
Downloading the data configuration file
l
Activating the eNodeB software and data configuration file
l
Supplementing the software automatically
l
Updating the license file
l
Commissioning the RET antenna
l
The M2000 automatically performs the eNodeB health check, which involves
checking for active alarms.
After the testing and verification is complete, the user decides whether to end
the eNodeB commissioning based on the actual situations. When the eNodeB
commissioning is complete, the M2000 restores the eNodeB to the normal state.
Thus, the eNodeB alarms can be reported as usual.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Commissioning the MBTS in GL or UL Mode on the
M2000
Figure 5-9.
5-33