7 Commissioning the MBTS by Using Local Maintenance
Terminal and M2000
If...
BT Opstart successfully is displayed
Baseband operation start fails
Figure 7-23 BT Opstart dialog box
Step 12 Choose RC0 > RC Attributes Management. Specify frequency in ARFCN, and click Set.
Getting RC attributes succeeded is displayed. Click Close.
Repeat
box is displayed, as shown in
Figure 7-24 RC Attributes Management dialog box
Step 13 Choose RC0 > RC Opstart > OK. The RC Opstart dialog box is displayed, as shown in
7-25.
7-26
Step 12
to set the frequencies of other carriers. The RC Attributes Management dialog
Figure
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3900 Series Multi-Mode Base Station
Then...
Click Close and proceed with the next step.
See
Step
8.
7-24.
Commissioning Guide
Figure
Issue 02 (2010-07-30)