12 Digital Io; Dio1; Dio2; Dio3 - ABB ACSM1 Manual

Group

12 DIGITAL IO

Settings for the digital inputs and outputs, and the relay output.
12
Firmware block:

DIO1

(6)
Selects whether DIO1 is used as a
digital input or as a digital output and
connects an actual signal to the
digital output. The block also shows
the DIO status.
Block outputs located in other
parameter groups
Firmware block:

DIO2

(7)
Selects whether DIO2 is used as a
digital or frequency input or as a
digital output and connects an actual
signal to the digital output. The block
also shows the DIO status.
Frequency input can be scaled with
standard function blocks. See chapter
Standard function
Block outputs located in other
parameter groups
Firmware block:

DIO3

(8)
Selects whether DIO3 is used as a
digital input or as a digital/frequency
output, connects an actual signal to
the digital/frequency output and
scales the frequency output. The
block also shows the DIO status.
Block outputs located in other
parameter groups
12.01 DIO1 CONF
Selects whether DIO1 is used as a digital input or as a digital output.
(0) Output
(1) Input
2.03 DIO STATUS
blocks.
2.03 DIO STATUS
2.10 DIO2 FREQ IN
2.03 DIO STATUS
2.11 DIO3 FREQ OUT
FW block:
DIO1 is used as a digital output.
DIO1 is used as a digital input.
DIO1
(page 94)
DIO2
(page 94)
(page 94)
DIO3
(page 94)
(page 94)
DIO1 (see above)
Parameters and firmware blocks
129