Tray Stacking Limit Cancellation Adjustment - Canon Finisher-AB1 Service Manual

Chapter 5
6) The preparations for this adjustment are
completed by pressing the push switch SW385
[1].
SW382
SW381
SW383 SW384 SW385
(-) (+) ENTER
F-5-165
7) When the push switch SW384 [1] is pressed once,
"+1" appears on the LED [2].
SW382
SW381
SW383 SW384 SW385
(-) (+) ENTER
[1]
F-5-166
8) This adjustment is completed when the push
switch SW385 [1] is pressed again.
5-50
[1]
[2]
SW382
SW381
SW383 SW384 SW385
(-) (+) ENTER
F-5-167
5.3.2.25 Tray stacking limit cancellation
adjustment
This adjustment is performed either when canceling
the tray stacking limit for coated paper and extra long
paper or when replacing the EEPROM (IC107) on
the finisher controller PCB.
[B]
[A]
F-5-168
[1] Loading under normal conditions
[2] Loading when the stacking limit is cancelled
[1]
0016-6232