Canon Finisher-AB1 Service Manual page 156

Chapter 5
5) Set dipswitch DIP SW382 [1] on the switch PCB
as illustrated below.
[1]
SW382
SW381
SW383 SW384 SW385
(-) (+) ENTER
F-5-167
6) Press switch SW385 [1] to set up for the
adjustment.
SW382
SW381
SW383 SW384 SW385
(-) (+) ENTER
F-5-168
7) Press switch SW383 [1] or SW384 [2] to fix the
degree of adjustment.
Press SW383 once and the LED [3]will display "-
1" and the gap between the disengage roller and
the paper will increase. (The disengage roller
moves in the A direction.)
Alternatively, press SW384 once and the LED [3]
will display "+1" and the gap between the
disengage roller and the paper will decrease.
(The disengage roller moves in the B direction.)
- Adjustment range: -5 to +4 (each increment is
0.3mm.)
5-50
[1]
SW382
SW381
SW383 SW384 SW385
(-) (+) ENTER
[1] [2]
F-5-169
8) Press switch SW385 [1] to complete the
adjustment.
SW382
SW381
SW383 SW384 SW385
(-) (+) ENTER
F-5-170
[1]