4.4.4.3 Removing the Handling Tray (rear)
1) Shift the handling tray aligning plate (rear) [1] in
the direction of the arrow; then, remove the screw
[2] and the claw [3] to detach the handling tray
aligning plate (rear).
[2]
F-4-95
2) Remove the handling tray (rear) [1].
- 2 screws [2]
[2]
F-4-96
0015-2169
[1]
[3]
[1]
4.4.5 Feed Belt
4.4.5.1 Before Removing the Transport
Belt
1) Remove the stacking wall (upper). (page 4-
5)Reference[Removing
(upper)]
2) Remove the stacking wall (lower). (page 4-
5)Reference[Removing
(lower)]
3) Remove the handling tray unit. (page 4-
23)Reference[Removing the Handling Tray
Unit]
4.4.5.2 Removing the Transport Belt
1) Remove the protective cover [1].
- 1 screw [2]
F-4-97
2) Loosen the screw [1], and shift the coupling (rear)
[2] to the left.
[1]
F-4-98
Chapter 4
the
Stacking
Wall
the
Stacking
Wall
[1]
[2]
[2]
4-25
0015-2170
0015-2171