Chapter 4
5) Open the front cover.
6) Remove the screw [2] from the latch base (front)
[1].
[2]
7) While lifting the latch base (front) [1], disconnect
the finisher from the host machine.
[1]
4-2
F-4-5
F-4-6
4.2 External Covers
4.2.1 Rear Lower Cover
4.2.1.1 Removing the Low Rear Cover
1) Remove the lower rear cover [1].
- 8 screws [2]
[1]
[2]
4.2.2 Rear Upper Cover
4.2.2.1 Removing the Upper Rear Cover
(right)
1) Remove the upper rear cover (right) [1].
- 2 screws [2]
[2]
[1]
F-4-7
[1]
F-4-8
0015-2104
[2]
0015-2105