Saddle Staple Position Adjustment - Canon Finisher-AB1 Service Manual

Chapter 5
7) Press switch SW383 [1] or SW384 [2] to fix the
degree of adjustment.
Press SW383 once and the LED [3]will display "-
1" and the gap between the disengage roller and
the paper will increase. (The disengage roller
moves in the A direction.)
Alternatively, press SW384 once and the LED [3]
will display "+1" and the gap between the
disengage roller and the paper will decrease.
(The disengage roller moves in the B direction.)
- Adjustment range: -5 to +4 (each increment is
0.3mm.)
SW382
SW381
SW383 SW384 SW385
(-) (+) ENTER
[1] [2]
F-5-200
8) Press switch SW385 [1] to complete the
adjustment.
5-60
SW382
SW381
SW383 SW384 SW385
(-) (+) ENTER
F-5-201

5.3.2.29 Saddle staple position adjustment

This adjustment is to be carried out when there is a
noticeable misalignment of the folding position with
the stapling position.
<MEMO>
This operation adjusts the length of the paper feed
time just before the folding operation is carried out.
(Adjusts Mxxxx rotation time.)
The adjustment prevents lack of feed caused by
slippage of the disengage roller, so that the defect
described above does not occur.
[1]
F-5-202
[1]
0016-6929
M101