Removing From The Host Machine; Finisher Assembly - Canon Finisher-AB1 Service Manual

4.1 Removing from the Host
Machine

4.1.1 Finisher Assembly

4.1.1.1 Disconnecting from the Host
Machine
Check to make sure that the machine is off and the
power plug is not connected to the power outlet.
1) Detach the shunt cable [1].
- 2 screws [2]
[1]
2) Free the signal cable [1] from the machine.
[1]
[2]
F-4-1
F-4-2
3) Remove the rear small cover [1].
- 4 screws [2]
0015-2102
[1]
[2]
4) Remove the screw [1] of the latch base (rear), and
shift the hinge [2] toward the front.
Chapter 4
[2]
F-4-3
[2] [1]
F-4-4
4-1