Adjusting The Stapler Position - Canon Finisher-AB1 Service Manual

3) Place A4 paper [1] in the intermediate handling
tray in the direction of the arrow. Make adjustments
so that there is no gap between the paper edge [1] and
the aligning plate [2]; then, fix the aligning plate
using a screw [3].
[3]
Before
adjustment
[2]
[C]
After
adjustment
[2]
F-5-30
[1]
[1]
[1]

5.3.2.3 Adjusting the Stapler Position

Go through the following steps if you have replaced
the stapler unit found in the intermediate handling
tray assembly:
1) Mark the position [1] of the stapler unit before
replacement.
2) Mount the new stapler unit [2] with reference
to the marking [1], fixing it in place using 2
screws [3].
[1]
[3]
F-5-31
Chapter 5
0015-2227
[2]
5-13