Removing Paper Jams From The Interrupt Tray - Canon FINISHER-C1 Service Manual

8) Pull the stitcher of the stitcher unit to the
front once, and then return it to its original
position.
Figure 1-344
9) Push the stitcher unit back to its original
position, and close the front lower cover.
• Whenever you have removed a staple jam,
be sure to execute staple edging.
Figure 1-345
COPYRIGHT © 1998 CANON INC. FINISHER-C1/SADDLE FINISHER-C2 REV. 0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 1 GENERAL DESCRIPTION
G. Removing Paper Jams
from the Interrupt Tray
If the display indicates a paper jam on the
interrupt tray, perform the following to remove
the jam:
1) Hold the finisher as shown, and detach it
from the copier.
Figure 1-346
2) Remove the jam.
Figure 1-347
3) Connect the finisher to the copier.
4) Operate as instructed on the display.
1-17