No.1 Flapper - Canon Finisher-AB1 Service Manual

8) Remove the 2 screws [1].
[1]
F-4-125
9) Hold the saddle unit [1] as shown, and move it in
the direction of the arrow. Before carrying it
away, be sure it is free from the rail.
[1]
F-4-126

4.4.10 No.1 Flapper

4.4.10.1 Removing the No. 1 Paper
1) Open the front cover.
2) Slide out the saddle unit [1] about 20 cm.
[1]
3) Slide out the auxiliary caster [1] in the direction of
Deflecting Plate
[1]
F-4-127
the arrow [A], and slide out the saddle unit in the
direction of the arrow [B].
[B]
F-4-128
Chapter 4
0015-2181
[A]
[1]
4-33