Canon Finisher-AB1 Service Manual page 82

Chapter 4
2) Free the cable [2] connected to the 2 clamps [1],
and disconnect the connector [3].
F-4-36
3) Remove the handling plate unit [1].
- 1 screw [2] (loosen)
- 1 screw [3]
- 6 screws [4]
- 2 positioning plates [5]
[4] [5] [4]
F-4-37
4-10
[4]
[4] [3] [5]
[2]
[1]
4) Remove the handling tray aligning plate (rear).
- 1 screw [2]
- 1 claw [3]
[2]
[2]
[1]
[3]
5) Remove the handling tray (front) [1].
- 2 screws [2]
6) Loosen the screw [1], and free the belt [2] from the
gear [3].
[1] [3]
F-4-38
[2]
F-4-39
[3] [2] [1]
F-4-40
[1]