Canon Finisher-AB1 Service Manual page 401

F-5-175
3) Detach the saddle inner cover (lower) [1].
- 4 screws [2]
- 1 knob [3]
[3]
[2]
[1]
F-5-176
4) Turn on the power of the finisher.
5) Turn on the power switch on the host machine to
set the host machine to the standby mode.
6) Open the front door, and insert the door switch
actuator into the door switch [1].
[2]
[1]
[3]
7) Remove the screw [2] to detach the switch cover
[1].
[2]
Chapter 5
F-5-177
[1]
[2]
F-5-178
[1]
5-53