Canon Finisher-AB1 Service Manual page 115

F-5-21
3) Insert a screwdriver [2] through the hole [1] in the
bottom face of the tray; then, disengage the tray in
the direction of [A], and lower the tray A/B in the
direction of [B].
[2]
F-5-22
[1]
[1]
[B]
[A]
Be sure to lower the tray A/B [2] until it does not
block the tray sensor (front/rear) [1].
[1]
[2]
F-5-23
4) Detach the inside cover (lower) and the switch
cover [1].
- 1 screw [2]
[2]
F-5-24
Chapter 5
[1]
[2]
[1]
5-9