Canon Finisher-AB1 Service Manual page 345

2) Disconnect the 2 connectors [1], and remove the 2
screws [2].
[1]
[2]
F-4-197
3) Remove the detection drive assembly [1].
- 2 screws [2]
[2]
F-4-198
[1]
4) Disconnect the connector [1], and free the cable
[2] from the 3 cable guides [3] and the edge
saddle [4].
5) Remove the 2 screws [5].
[5]
[4]
F-4-199
6) Remove the horizontal registration sensor unit [1]
in the direction of the arrow. (page 5-
10)Reference[Adjusting the Sensor Intensity]
[1]
F-4-200
Chapter 4
[1]
[2]
[3]
4-51