Canon Finisher-AB1 Service Manual page 99

3) Remove the 2 screws [1], and lead out the cable
[2] in the direction of the arrow.
[1]
F-4-103
4) Remove the tray B cover [1].
- 4 screws [2]
[1]
F-4-104
7) Lift the tray B unit [1] to detach. (page 5-
10)Reference[Adjusting the Tray A/B Position]
F-4-105
[2]
[2]
[1]
4.4.7.3 Points to Note About the Tray A/B
Cable
When mounting the tray A/B unit, take care so that
the cables will not become tangled.
F-4-106
4.4.7.4 Points to Note When Handling the
Stacking Wall Rail
Take care not to damage the stacking rail [1]. The
presence of scratches or dents can affect stacking
performance. If soiling is found, clean it with
alcohol.
[1]
[1]
F-4-107
Chapter 4
0015-2178
0015-2179
4-27