Stack Delivery Roller - Canon Finisher-AB1 Service Manual

3) While releasing the claw [1], remove the gear [2],
E-ring [3], and ball bearing [4].
[1]
F-4-81
4) Remove the separation roller shaft [1] in the
direction of the arrow.
- Screw[2]
[2] [1]
F-4-82
5) After the engaging roller (front) is removed, the
engaging roller (rear) is similarly removed.

4.4.2 Stack Delivery Roller

4.4.2.1 Before Removing the Stack
Delivery Upper Roller
1) Remove the stacking wall (upper). (page 4-
5)Reference[Removing
(upper)]
2) Remove the stacking wall (lower). (page 4-
5)Reference[Removing
(lower)]
3) Remove the handling tray unit. (page 4-
23)Reference[Removing the Handling Tray
Unit]
0015-2163
the Stacking Wall
the Stacking Wall
4.4.2.2 Removing the Stack Delivery
Upper Roller
1) Remove the tension springs [1].
[1]
F-4-83
2) Orient the handling tray unit [1] as shown.
F-4-84
Chapter 4
0015-2164
[1]
[1]
4-21