Canon Finisher-AB1 Service Manual page 86

Chapter 4
9) Detach the belt [1] from the gear [2].
[1] [2]
F-4-55
10) Remove the 2 slide shafts [1] in the direction of
the arrow.
- 2 screws [2]
[2]
F-4-56
11) Detach the shift assembly [1] in the direction of
the arrow.
When detaching the shift assembly, take care not to
hit the clamp [2].
4-14
12) Disconnect the connector [1], and free the cable
[2] from the clamp [3] and the 2 edge saddles [4].
[1]
[1]
F-4-57
[4]
[1] [2]
F-4-58
[2]
[3]