Canon Finisher-AB1 Service Manual page 339

2) Remove the tension arm plate [1].
- 1 tension spring [2]
F-4-174
3) Remove the roller arm plate [1].
- 1 tension spring [2]
- 1 E-ring [3]
- 2 screws [4]
F-4-175
[2]
[1]
[3]
[4]
[1]
[2]
4) Remove the C-ring [1], gear [2], and ball bearing
[3].
F-4-176
5) Remove the C-ring [1] and the ball bearing [2]
found at the rear of the saddle unit.
[1]
F-4-177
Chapter 4
[3]
[2]
[1]
[2]
4-45