8) This adjustment is completed when the push
switch SW385 [1] is pressed again.
SW382
SW381
SW383
SW384 SW385
(-)
(+)
ENTER
F-5-143
5.3.2.21 Saddle staple alignment
adjustment
Be careful not to touch any of the drive parts
when checking the adjustment since this job
is done with no covers in place and with the
finisher running.
This adjustment is performed either when the saddle
staple unit is replaced or when the staple positions
(saddle delivery) at the front and the rear are
misaligned.
The operation procedure is described below.
1) Open the front door.
- 1 knob [2]
- 2 screws [3]
[1]
T-5-7
3) Detach the saddle inner cover (lower) [1].
- 4 screws [2]
0016-4897
- 1 knob [3]
[2]
[1]
Chapter 5
F-5-144
[3]
F-5-145
[2]
[1]
[3]
[2]
5-43