Then mounting the slide shaft (lower), be sure that
the hole [1] of the press roller unit cover and the hole
[2] of the knob are matched while the press roller
unit is in its rearmost position.
F-4-166
7) While opening the side plate [1] in the direction of
the arrow, remove the press roller unit [2]
together with the slide shaft (upper) [3].
[3]
[2]
[1]
F-4-167
[1]
[2]
[1]
8) Detach the shaft [2] from the press roller unit [1].
F-4-168
4.4.16 Folding Roller
4.4.16.1 Before Removing the Folding
Roller
1) Open the front cover.
2) Slide out the saddle unit.
[1]
F-4-169
Chapter 4
[2]
[1]
0015-2190
4-43