Displaying Remote Access Session Information
Displaying Other Remote Access Session Information
To display other remote access configuration information, perform one of the following tasks:
Command
show running-config
show ssh key [dsa | rsa | rsa1]
show ssh maxsessions [context_name]
show telnet maxsessions [context_name] Display the maximum number of enabled Telnet sessions. Only context
Cisco 4700 Series Application Control Engine Appliance Administration Guide
2-24
Purpose
Displays the running configuration.
Displays the host key pair details for the specified key or for all keys if you do not
specify a key.
See the
"Generating SSH Host Key Pairs"
Displays the maximum number of enabled SSH sessions. Only context
administrators can view SSH session information associated with a particular
context.
See the
"Configuring Maximum Number of SSH Sessions"
administrators can view Telnet session information associated with a particular
context.
See the
"Configuring the Maximum Number of Telnet Management Sessions"
section.
Chapter 2
Enabling Remote Access to the ACE
section.
section.
OL-20823-01