Displaying Hardware Information - Cisco 4700M Administration Manual

Displaying Hardware Information

Displaying Hardware Information
To display ACE hardware information, perform one of the following tasks:
Command
show hardware
show inventory [raw]
Table 5-1
Table 5-1 Field Descriptions for the show hardware Command
Field
Product Number
Serial Number
Hardware Rev
VID
MFG Part Num
MFG Revision
Slot No.
Type
Table 5-2
Table 5-2 Field Descriptions for the show inventory Command
Field
Name
Descr
PID
VID
SN
Examples
The following example shows the output of the show hardware command:
host1/Admin # show hardware
Hardware
Product Number: ACE-4710-K9
Cisco 4700 Series Application Control Engine Appliance Administration Guide
5-2
Purpose
Displays the ACE hardware inventory details.
Displays the system hardware inventory of the ACE. This command displays information about
the field replaceable units (FRUs) in the ACE, including product identifiers, serial numbers,
and version identifiers.
The optional raw keyword displays information about each component in the ACE.
describes the fields in the show hardware command output.
Description
Product number of the ACE
Serial number of the ACE
Hardware revision of the ACE
Version identification number of the ACE
Manufacturing part number of the ACE
Manufacturing revision of the ACE
Not applicable
Identifies the device type as an ACE appliance
describes the fields in the show inventory command output.
Description
Name assigned to the ACE component.
If you do not specify the raw keyword, the only named object that displays is the ACE
Note
chassis. If you specify theraw keyword, each monitored component of the chassis displays.
Description of the ACE component.
Product identifier of the ACE.
Version identifier of the ACE.
Serial number of the ACE.
Chapter 5 Displaying ACE Hardware and Software System Information
OL-20823-01