Specifying The Mac Address Banks For A Shared Vlan - Cisco 4700M Administration Manual

Chapter 6 Configuring Redundant ACEs

Specifying the MAC Address Banks for a Shared VLAN

This section describes how to specify the MAC address banks to be used by the local ACE and the peer
ACE with a shared VLAN (FT VLAN). You configure these commands to prevent MAC address
conflicts between the two peer ACEs. For details about these commands, see the Cisco 4700 Series
Application Control Engine Appliance Routing and Bridging Configuration Guide.
Restrictions
This topic includes the following restrictions:
•
•
Detailed Steps
Command
Step 1
config
Example:
host1/Admin# config
host1/Admin#(config)#
Step 2
shared-vlan-hostid number
Example:
host1/Admin(config)# shared-vlan-hostid 3
no shared-vlan-hostid
Example:
host1/Admin(config)# no shared-vlan-hostid
Step 3
peer shared-vlan-hostid number
Example:
host1/Admin(config)# peer
shared-vlan-hostid 3
OL-20823-01
Perform this task from the Admin context only.
Select a bank of MAC addresses for the peer that is different from that used by the local ACE.
Cisco 4700 Series Application Control Engine Appliance Administration Guide
Purpose
Enters global configuration mode.
Configures the bank of MAC addresses that the ACE uses. Enter
a number from 1 to 16. Be sure to configure different bank
numbers for multiple ACEs.
The number argument is the bank of MAC addresses that the ACE
uses. Enter a number from 1 to 16. Be sure to configure different
bank numbers for multiple ACEs.
For details about this command, see the Cisco 4700 Series
Application Control Engine Appliance Routing and Bridging
Configuration Guide.
(Optional) Removes a configured bank of MAC addresses.
Configures a specific bank of MAC addresses for a peer ACE in
a redundant configuration.
The number argument is the bank of MAC addresses that the ACE
uses. Enter a number from 1 to 16. Be sure to configure different
bank numbers for multiple ACEs.
For details about this command, see the Cisco 4700 Series
Application Control Engine Appliance Routing and Bridging
Configuration Guide.
Configuring Redundant ACEs
6-17