Cisco 4700M Administration Manual page 66

Enabling Remote Access to the ACE
The ACE automatically resets the associated service policy statistics to provide a new starting point for
the service policy statistics the next time that you attach a traffic policy to a specific VLAN interface or
globally to all VLAN interfaces in the same context.
To apply the policy map to a specific VLAN interface only, see the
Note
Specific VLAN Interface"
Restrictions
The ACE allows only one policy of a specific feature type to be activated on a given interface and only
in the input direction.
Detailed Steps
Command
Step 1
config
Example:
host1/Admin# config
host1/Admin(config)#
Step 2
service-policy input policy_name
Example:
host1/Admin(config)# service-policy input
REMOTE_MGMT_ALLOW_POLICY
no service-policy input policy_name
Example:
host1/Admin(config)# no service-policy
input REMOTE_MGMT_ALLOW_POLICY
Step 3
do copy running-config startup-config
Example:
host1/Admin(config)# do copy
running-config startup-config
Cisco 4700 Series Application Control Engine Appliance Administration Guide
2-12
section.
Purpose
Enters global configuration mode.
Applies the remote access policy map globally to all of the
VLANs associated with a context.
The policy_name argument is the name of a previously defined
policy map, configured with a previously created policy-map
command. The name can be a maximum of 40 alphanumeric
characters.
(Optional) Removes the remote access traffic policy globally
from all VLANs associated with a context.
(Optional) Copies the running configuration to the startup
configuration.
Chapter 2 Enabling Remote Access to the ACE
"Applying a Service Policy to a
OL-20823-01