Removing A Virtual Context License - Cisco 4700M Administration Manual

Chapter 3 Managing ACE Software Licenses
Detailed Steps
Command
license uninstall license_filename
Example:
host1/Admin# license uninstall disk0:
ACE-AP-02-LIC.lic

Removing a Virtual Context License

This section describes how to removes a virtual context license.
Prerequisite
Before removing any virtual context license, save the Admin running configuration and the user context
Caution
running configurations to a remote server. When you remove a demo or permanent virtual context
license, the ACE removes all user contexts from the Admin running configuration. By removing the user
contexts, their running and startup configurations are also removed from the ACE.
Restrictions
This topic includes the following restrictions:
•
•
Table 3-6
Current number of contexts Applicable licenses
5 (default)
20
Follow these steps to remove a context license:
Save the Admin and user context running configurations to a remote server by entering the copy
Step 1
running-config command in Exec mode in each context. For more information on this command, see
Chapter 4, Managing the ACE
For example, to copy the Admin running configuration to an TFTP server as R-CONFIG-ADM, enter:
host1/Admin# copy running-config tftp://192.168.1.2/R-CONFIG-ADM
To copy the C1 user context running configuration to an TFTP server, access the C1 context and enter:
host1/C1# copy running-config tftp://192.168.1.2/R-CONFIG-C1
OL-20823-01
You must have the Admin role in the Admin context to remove the license file.
The number of virtual contexts and type of licenses currently installed on the ACE determines which
license you can remove. Table 3-6
ACE, and the remaining number of context after the license is removed.
VIrtual Context License Removal
Not applicable
ACE-AP-VIRT-020
Cisco 4700 Series Application Control Engine Appliance Administration Guide
Purpose
Removes a performance throughput license, HTTP compression
performance license, application acceleration software feature
pack, or SSL TPS.
The license_filename argument specifies the filename of the
license file that you want to remove. Enter the license filename as
an unquoted text string with no spaces.
lists the currently installed contexts, the type of license on the
Software.
Managing ACE Appliance Software Licenses
Results of license removal
—
5 contexts
3-11