Configuring An Snmp Location - Cisco 4700M Administration Manual

Chapter 7 Configuring SNMP
Detailed Steps
Command
Step 1
config
Example:
host1/Admin# config
host1/Admin(config)#
Step 2
snmp-server contact contact_information
Example:
host1/Admin(config)# snmp-server contact
"User1 user1@cisco.com"
no snmp-server contact
Example:
host1/Admin(config)# snmp-server contact
Step 3
do copy running-config startup-config
Example:
host1/Admin(config)# do copy
running-config startup-config

Configuring an SNMP Location

This section describes how to specify the SNMP system location.
Restrictions
You can specify one location only.
Detailed Steps
Command
Step 1
config
Example:
host1/Admin# config
host1/Admin(config)#
Step 2
snmp-server location location
Example:
host1/Admin(config)# snmp-server location
"Boxborough MA"
OL-20823-01
Purpose
Enters global configuration mode.
Specifies the contact information for the SNMP system.
Enter the contact_information argument as a text string with a
maximum of 240 alphanumeric characters, including spaces. If
the string contains more than one word, enclose the string in
quotation marks (" "). You can include information on how to
contact the person; for example, you can provide a phone number
or an e-mail address.
(Optional) Removes the SNMP contact name.
(Optional) Copies the running configuration to the startup
configuration.
Purpose
Enters global configuration mode.
Specifies the SNMP system location.
Enter the location argument as the physical location of the
system. Enter a text string with a maximum of 240 alphanumeric
characters, including spaces. If the string contains more than one
word, enclose the string in quotation marks (" ").
Cisco 4700 Series Application Control Engine Appliance Administration Guide
Configuring SNMP
7-37