Cisco 4700M Administration Manual page 68

Enabling Remote Access to the ACE
Detailed Steps
Command
Step 1
config
Example:
host1/Admin# config
host1/Admin(config)#
Step 2
interface vlan number
Example:
host1/Admin(config)# interface vlan 50
host1/Admin(config-if)#
Step 3
service-policy input policy_name
Example:
host1/Admin(config-if)# service-policy
input REMOTE_MGMT_ALLOW_POLICY
no service-policy input policy_name
Example:
host1/Admin(config-if)# no service-policy
input REMOTE_MGMT_ALLOW_POLICY
Step 4
do copy running-config startup-config
Example:
host1/Admin(config-if)# do copy
running-config startup-config
Step 5
do show service-policy [ policy_name
[detail]]
Example:
host1/Admin(config-if)# do show
service-policy REMOTE_MGMT_ALLOW_POLICY
Step 6
do clear service-policy policy_name
Example:
host1/Admin(config-if)# do clear
service-policy REMOTE_MGMT_ALLOW_POLICY
Cisco 4700 Series Application Control Engine Appliance Administration Guide
2-14
Chapter 2
Purpose
Enters global configuration mode.
(Optional) Specifies the VLAN to which the remote access policy
map is to be applied.
The number argument specifies the VLAN.
This command enters the interface configuration mode.
Attaches the remote access policy map to the specified VLAN
only.
The policy_name argument specifies the policy map name.
To apply the policy map globally to all of the VLANs associated
with a context, see the "Applying a Service Policy Globally to All
VLAN Interfaces in the Same Context"
(Optional) Detaches the remote access traffic policy from the
VLAN.
(Optional) Copies the running configuration to the startup
configuration.
(Optional) Displays service policy statistics for all policy maps or
a specific Layer 3 and Layer 4 remote network traffic
management policy map.
The keywords, options, and arguments are as follows:
policy_name—(Optional) Existing policy map that is
•
currently in service (applied to an interface) as an unquoted
text string with a maximum of 64 alphanumeric characters. If
you do not enter the name of an existing policy map, the ACE
displays information and statistics for all policy maps.
detail—(Optional) Displays a moredetailed listing of policy
•
map statistics and status information.
The ACE updates the counters that the show
Note
service-policy command displays after the applicable
connections are closed.
(Optional) Clears the service policy statistics for a policy map.
For the policy_name argument, enter the identifier of an existing
policy map that is currently in service (applied to an interface).
Enabling Remote Access to the ACE
section.
OL-20823-01