Cisco 4700M Administration Manual page 142

Displaying or Collecting Technical Information for Reporting Problems
Command
tac-pac {disk0:[path/]filename |
{ftp://server/path[/filename] |
scp://[username@]server/path[/filename] |
sftp://[username@]server/path[/filename]
| tftp://server[:port]/path[/filename]}
Examples
The following example shows the show tech-support command output:
`show version`
Cisco Application Control Software (ACSW)
TAC support: http://www.cisco.com/tac
Copyright (c) 1985-2008 by Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
http://www.gnu.org/licenses/gpl.html.
Software
loader:
system:
adbuild_03:31:25-2008/08/06_/auto/adbure_nightly2/nightly_rel_a3_1_0_
throttle/REL_3_0_0_A3_0_0
system image file: (nd)/192.168.65.31/scimitar.bin
Device Manager version 1.1 (0) 20080805:0415
installed license: ACE-AP-VIRT-020 ACE-AP-C-1000-LIC
Hardware
cpu info:
memory info:
Cisco 4700 Series Application Control Engine Appliance Administration Guide
5-14
Purpose
Redirects the same information as the show tech-support command output to a
file on either the ACE disk0: or a remote server.
The keywords, arguments, and options are as follows:
disk0:[path/]filename—Specifies that the file destination is the disk0: file
•
system of the current context. If you do not provide the optional path, the
ACE copies the file to the root directory on the disk0: file system.
ftp://server/path[/filename]—Specifies the FTP network server and,
•
optionally, the filename.
scp://[username@]server/path[/filename]—Specifies the SCP network
•
server and optional file name.
sftp://[username@]server/path[/filename]—Specifies the SFTP network
•
server and, optionally, the filename.
tftp://server[:port]/path[/filename]—Specifies the TFTP network server
•
and, optionally, the filename.
The output of the show tech-support command is in gzip format. We
recommend that you include the .gz extension in the filename so that it can be
easily unzipped from the destination file system.
Version 0.95
Version A3(1.0) [build 3.0(0)A3(0.0.148)
Motherboard:
number of cpu(s): 2
Daughtercard:
number of cpu(s): 16
total: 6226392 kB, free: 4315836 kB
shared: 0 kB, buffers: 17164 kB, cached 0 kB
Chapter 5 Displaying ACE Hardware and Software System Information
OL-20823-01