Configuring An Snmp Contact - Cisco 4700M Administration Manual

Configuring SNMP
Detailed Steps
Command
Step 1
config
Example:
host1/Admin# config
host1/Admin(config)#
Step 2
snmp-server community community_name
[group group_name | ro]
Example:
host1/Admin(config)# snmp-server community
SNMP_Community1 group Network-Monitor
no snmp-server community community_name
[group group_name | ro]
Example:
host1/Admin(config)# no snmp-server
community SNMP_Community1 group
Network-Monitor
Step 3
do copy running-config startup-config
Example:
host1/Admin(config)# do copy
running-config startup-config

Configuring an SNMP Contact

This section describes how to specify the contact information for the SNMP system.
Restrictions
You can specify information for one contact name only.
Cisco 4700 Series Application Control Engine Appliance Administration Guide
7-36
Purpose
Enters global configuration mode.
Creates or modifies SNMP community names and access
privileges.
The keywords, arguments, and options are as follows:
community_name—SNMP community name for this system.
•
Enter an unquoted text string with no space and a maximum
of 32 alphanumeric characters.
group group_name—(Optional) Identifies the role group to
•
which the user belongs. Enter an unquoted text string with no
space and a maximum of 32 alphanumeric characters.
ro—(Optional) Allows read-only access for this community.
•
(Optional) Removes an SNMP community.
(Optional) Copies the running configuration to the startup
configuration.
Chapter 7 Configuring SNMP
OL-20823-01